Boysen Permacoat Flat Latex Paint White B701 – 4L

Description

Boysen Permacoat Flat Latex White B701 – 4L

Planning to refresh your walls or start a painting project? Boysen Permacoat B701 is a white, flat-finish acrylic latex paint for suitable interior and exterior surfaces. This listing is for one 4L container, product code B701-4L.

Choose the right paint for your project

B701 can be used as the primer in Boysen’s recommended painting system. It can also be used for a flat white topcoat. Primer and topcoat are separate applications; plan for a primer coat followed by two topcoats, with surface preparation appropriate to your project.

Product specifications

• Brand and range: Boysen Permacoat
• Model: B701 / B-701
• Colour and finish: White, flat
• Formulation: 100% acrylic latex
• Container size: 4L; sold per piece
• Suitable surfaces: Concrete, brick, plaster and drywall, indoors or outdoors
• Application: Brush, roller or airless spray
• Clean-up: Water

How much paint will you need?

Boysen gives theoretical coverage of 25–30 m² per 4L as primer and 30–35 m² per 4L as topcoat, at its specified dry-film thickness of 1.7–1.4 mils. These figures describe an application, not a finished multi-coat project. Texture, porosity and application affect actual consumption.

Send us your wall measurements, surface condition and planned number of coats. We can help you estimate containers and check which other supplies to purchase.

Preparation and drying

Start with a properly prepared, clean and dry surface. Follow Boysen’s guidance for new surfaces, repainting, putty and any required surface treatment. B701 is touch-dry in approximately 30 minutes and can be recoated after 1 hour when measured at 25°C and 50% relative humidity; site conditions can change drying time.

What is included?

One 4L container of Boysen Permacoat B701 Flat Latex White. Brushes, rollers and other tools shown in the application illustration are examples and are sold separately.

Plan your painting supplies

Ask SAVG King’s Hardware about rollers, brushes, masking tape, sandpaper and suitable surface-preparation products. Tell us whether you are painting a new wall or repainting an existing finish so we can help you choose a practical shopping list.

Pickup and delivery

Request store pickup or a delivery quotation. Our team will confirm availability, delivery arrangements and your final total before payment or dispatch. Delivery charges are confirmed separately.

Technical information: Boysen Permacoat technical data and Boysen primer and topcoat guide.

Manufacturer-verified liquid specifications

Pack volume: 4 L. Boysen Permacoat B-701 Flat published density: approximately 1.40 kg/L (tolerance ±0.05 kg/L). Calculated paint/product content mass: approximately 5.60 kg. This figure excludes the container and shipping carton. It must not be confused with the separate provisional packed shipping estimate already shown below; actual gross parcel weight and dimensions still require verification.

Source: Boysen manufacturer technical data. Checked 12 October 2026.

Estimated packed shipping details

Provisional estimate: approximately 7.0 kg and 22 × 22 × 26 cm (length × width × height) for one packed 4L container. These figures describe the estimated parcel, not the paint-can dimensions. Actual packing may differ. Orders with multiple containers require a new packing quote. We confirm the delivery fee and courier availability before payment or dispatch.