BOYSEN® Wallguard™ Dirt Resisting Exterior Latex Paint

BOYSEN® Wallguard™ B-5715 Dirt Resisting Exterior Latex Paint

Product Description: BOYSEN® Wallguard™ B-5715 is a premium dirt-resisting exterior latex paint formulated with 100% acrylic resin. It is specially designed to withstand airborne pollutants, smog, mildew, and dust, making it an ideal choice for industrial areas, highways, and high-rise buildings where maintaining a freshly painted look with minimal maintenance is crucial.

Technical Data:

• Principal Uses: Suitable for newly constructed buildings and repainting old structures.
• Vehicle Type: Acrylic
• Finish: Semi-Gloss
• VOC Content: 40.4 g/L (±2.0 g/L)
• Drying Time:
  • Touch: 1 hour
  • Recoat: 2 hours (Measured at 25°C and 50% relative humidity)
• Density: 1.20 kg/L (±0.05 kg/L)
• Theoretical Coverage: 30-35 sq. m. per 4 Liters at 1.7-1.4 mils DFT (Depending on surface texture and porosity)
• Packaging: 4-Liter and 16-Liter cans
• Application: By brush, roller, or airless spray
• Tint Bases: Available in Pastel Base, Medium Base, Deep Base, and Clear Base

Features & Benefits:

• 100% acrylic formulation for superior durability
• High resistance to alkali, mildew, and airborne pollutants
• Exceptional dirt, dust, and smog resistance
• Excellent gloss retention, preventing fading, cracking, and peeling
• Superior block and scrub resistance for long-lasting performance

Tinting:

• Accepts BOYSEN® Latex Colors at a maximum level of 1/4 Liter per 4-Liter can.
• Note: B-1466 Hansa Yellow and B-1407 Toluidine Red are not recommended for use with Wallguard.

Thinning & Clean-up:

• Use as supplied. If necessary, thin with a maximum of 1/2 Liter of clean water per 4-Liter can.
• Clean application tools with water immediately after use.

Surface Preparation:

For New Concrete:

1. Allow newly constructed concrete to cure for 14-28 days under normal conditions.
2. Ensure the surface is dry, clean, and free from oil, grease, dust, and contaminants.
3. If necessary, apply BOYSEN® Masonry Neutralizer B-44 (1 part neutralizer to 16 parts water) using a brush or roller.
4. Let dry overnight, rinse with water, and allow the surface to dry completely before painting.
5. If concrete is cured for over 28 days, neutralization is not required.

For Repainting:

1. Remove all loose, flaking, or peeling paint using manual scraping or BOYSEN® Paint and Varnish Remover B-141.
2. Wash surfaces thoroughly to remove chemical residues and let them dry.
3. For chalky old paint, apply BOYSEN® Chalk Blocker™ B-7304 as a surface conditioner.
4. Treat mildew-infested areas with a bleach solution (1 part bleach to 3 parts water), leave for 24 hours, and rinse.

Painting Schedule:

For New Concrete:

• Primer: BOYSEN® Acrytex™ Primer B-1705
• Putty: BOYSEN® Acrytex™ Cast B-1711
• Topcoat: BOYSEN® Wallguard™ B-5715 (2 coats)

For Repainting:

• Topcoat: BOYSEN® Wallguard™ B-5715 (2 coats) on properly prepared surfaces

Ideal Applications:

• Industrial buildings and areas with high air pollution
• High-rise structures requiring long-lasting paint with minimal maintenance
• Homes and commercial spaces near roads and highways

For best results, follow the recommended application and surface preparation procedures. BOYSEN® Wallguard™ B-5715 ensures long-lasting beauty and protection for your exterior walls!