BOYSEN® Xyladecor™
Solvent-Based Wood Stain with Water-Repellent & Preservative Properties
BOYSEN® Xyladecor™ is a deep-penetrating wood stain that combines decorative appeal, water resistance, and wood preservation in one product. It enhances the natural wood grain with a silk matte finish, making it ideal for both interior and exterior wood surfaces.
Key Features:
✔ Deep Penetration: Soaks into the wood fibers for lasting protection.
✔ Water Repellent: Helps prevent moisture damage.
✔ Preserves Wood: Protects against decay and weathering.
✔ Silk Matte Finish: Enhances the natural beauty of wood.
✔ No Primer Needed: Apply directly to bare wood for best results.
Surface Preparation:
✅ Ensure the wood is clean, dry, and free from dust or dirt.
✅ Hammer in all nails and apply wood filler as needed.
✅ Sand the wood until smooth, then wipe with a clean rag.
Application Methods:
🔹 By Brush: Apply along the wood grain, then lightly wipe off excess stain. Allow 4-8 hours drying time before recoating for a darker shade.
🔹 By Spray: Use a 1.5 mm nozzle at 40 psi for smooth, even coverage.
🔹 By Dipping: Submerge wood for 2 minutes, then let excess stain drain off. If necessary, lightly brush along the grain before drying.
Important Notes:
⚠ For even coloring on unevenly absorbent wood, apply BOYSEN® Xyladecor™ Colorless first before adding a tinted variant.
⚠ BOYSEN® Xyladecor™ Colorless is NOT recommended for exterior use on its own—always apply a tinted variant over it for protection.
There are no reviews yet.